1 / 4
Windshield washer fluid funnel - Skoda with hole
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I liked the original model but wanted to minimize splashing and make refilling easier, so I added a 40mm hole.
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 135
- Makes
- 1
- Views
- 422
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For better strength and watertightness, use the following settings:
- Walls: 3
- Layer height: 0.3mm
- Line width: 1mm (0.8mm should work for most hotends if 1mm is too much)
- Wall generator: Classic (Arachne doesn’t work well with this model)
- Hotend temperature: Increase by 10°C from your usual setting
- Print speed: Slow (I used 60mm/s)