1 / 3
4000D/X 2.5" SSD tray to 120mm fan adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits 120mm fans above the PSU where SSD trays could go
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 85
- Makes
- 0
- Views
- 524
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
The only additional hardware needed are the screws to attach the fan, and a screw to secure it to the PSU shroud.
Support is recommended for the two hooks, and for the other hole on the bottom (top when turned right way after printing) only if your tolerances are good.
Any material is fine.
Does not block any cable routing below motherboard tray and leaves room for any headers in that location, because of this you need to screw the adapter down through the blades of the fan, after of course getting the fan on the adapter first.
