Counting matching models…
Here is a front case cover for the Corsair 4000d that I designed. I printed it on a Kobra 3 max and split the surrounding bracket in half to fit the plate. You can split the slats in half but there will be some strength issues. Make sure…
Universal 120mm Fan Blank / Cover This is a versatile 120mm fan blank designed to cover standard 120mm fan mounts. While I originally created this as a specific fix for the Corsair Frame 4000D Side Airflow Shoud, it is a universal part…
Corsair 4000D Shroud Aesthetic Endplate This is an aesthetic add-on for the Side Airflow Shroud - Frame 4000D . While the original shroud is great for performance, it leaves a "nest" of PSU power cables and the raw edge of your fan frame…
Officially Corsair doesn't support top-mounted 360 AIO on this case, and a lot of people seem to grab an angle grinder or otherwise alter the case to make it fit. A common "fix" is to remove the front panel, but that leaves stupid-looking…
"Extra" accessory to get a working exhaust fan solution, after doing a top-mounted 360 AIO "upgrade" 15% infill, no supports. Material shouldn't matter, I used PLA because I ran out of PETG.
Designed to be printed vertically with supports where it interfaces with the case. Once these supports are removed. Simply insert the holder into the holes in the case and push down. It is now ready to hold your headphones.
Small clips to separate the side glass of the case and improve the airflow of a graphics card mounted vertically. tested on 0.4mm nozzle with PETG
Hello all! I want to start by saying this model was designed to be printed with a .2mm nozzle but based on user feedback it can be printed with a .4mm with no issues but your results may vary. I made the core model Parametric but all the…
Remixed the original to add the Corsair triangular holes to match the PSU basement cover 3 hole styles available: Style 1: Small Triangle Holes Style 2: Large Triangle Holes Style 3: Large Triangle Holes - Alternate rotation Also included…
If you find my designs useful, please consider sending a tip Update: Connectors are now slightly wider and thicker and should be a snug fit. Custom Elite Dangerous version of my Corsair iCUE 4000X Front Panel design showing the 3 base…
If you find my designs useful, please consider sending a tip UPDATE: Thanks to design adjustments by DryFly when trying to print his own on an Ender 3 with built-in tabs, I have updated the design to just 2 variants, both with internal…
If you find my designs useful, please consider sending a tip I recently mounted my GeForce RTX 3080 vertically in my Corsair iCUE 4000X case using the Linkup PCI-E 4.0 Riser Support cable but I was concerned about how much the Riser's PCB…
The only additional hardware needed are the screws to attach the fan, and a screw to secure it to the PSU shroud. Support is recommended for the two hooks, and for the other hole on the bottom (top when turned right way after printing)…
This is a custom shroud that easily mounts via existing threaded holes found on the bottom of the internal case (top of the power supply compartment). This shroud covers the exposed pins and connections on the lower edge of the installed…
HDD Rack for the Corsair Frame 4000D. 0.25" Air Space, 4 HDD Stl has orientation Top vs Bottom, not symetrical. The HDD add the rigidity, stack them in order. Mods: Add missing hole to the included HDD Tray, circled in pic Use SATA power…
EOS 4000D SD Card and Battery Pack, for 2 Batterys and 10 SD Cards 15% Adaptive Cubic infill 0.4 mm Nozzle 0.2 mm Layer Height
This model is reupload from thingverse. original author is TRASTO2414.
The Frame 4000D is very customizable. I wanted exhaust fans that fit over the AIO Cooler. 200mm fans are quiet and move alot of CFM. This adapter is plug and play with the case Top and the Top Panel. Fit 2 x 200mm fans. I recommend the…
This shroud allows you to mount 3 fans in the bottom section of the Frame 4000D case. It is helpful both in setups with custom cooling where it will add fresh air into the case so you can exhaust the radiator air outside of the case, but…
A stronger shelf surface for the top of a Corsair 4000D case with a hex pattern, nothing fancy!
This shroud allows you to mount 3 fans in the bottom section of the Frame 4000D case. It will add fresh air into the case for air cooled GPU's as fresh air will get blown directly into the GPU instead of recirculated air from the case. In…
The GPU part was split into 2 smaller parts for those with shorter Z axis printers. I also added holes and pins to help align the 2 halves when gluing them together You will need to print the following parts: (1x) Front (1x) GPU_1 (1x)…
Cover for the external PCI screw panel for Corsair Frame 4000D, I didnt like how open the slot looked, I copied the hole patteern so it looks OEM and doesnt limit airflow if thats a thing for that opening in the case.
Redirects the air from the bottom case fan on the 4000D into the main part of the case for better cooling.
added a cutout for the Noctua nf-a20 fans in the front. added about a .5mm around it so hopefully no interference.
PCI/PCIE slot cover for the Corsair Frame 4000D case. The hole felt a little weird for me - I figured I would try to design a cover for it. I would suggest printing it inside face-down because that way you will manage to hide most of the…
Designed myself in fusion 360, test printed a few parts that all snaped in good. I snaped into multiple places to ensure I had enough play to fit. It snaps in nice and snaps off easily without much force. A pause can be added for single…
Here is a front case cover for the Corsair 4000d that I designed. I printed it on a Kobra 3 max and split the surrounding bracket in half to fit the plate. You can split the slats in half but there will be some strength issues. Make sure…
Universal 120mm Fan Blank / Cover This is a versatile 120mm fan blank designed to cover standard 120mm fan mounts. While I originally created this as a specific fix for the Corsair Frame 4000D Side Airflow Shoud, it is a universal part…
Corsair 4000D Shroud Aesthetic Endplate This is an aesthetic add-on for the Side Airflow Shroud - Frame 4000D . While the original shroud is great for performance, it leaves a "nest" of PSU power cables and the raw edge of your fan frame…
Officially Corsair doesn't support top-mounted 360 AIO on this case, and a lot of people seem to grab an angle grinder or otherwise alter the case to make it fit. A common "fix" is to remove the front panel, but that leaves stupid-looking…
"Extra" accessory to get a working exhaust fan solution, after doing a top-mounted 360 AIO "upgrade" 15% infill, no supports. Material shouldn't matter, I used PLA because I ran out of PETG.
Designed to be printed vertically with supports where it interfaces with the case. Once these supports are removed. Simply insert the holder into the holes in the case and push down. It is now ready to hold your headphones.
Small clips to separate the side glass of the case and improve the airflow of a graphics card mounted vertically. tested on 0.4mm nozzle with PETG
ssd tray that you can add with it third and fourth 2.5inc disk. wont work it with mine so i made it shorter.
Hello all! I want to start by saying this model was designed to be printed with a .2mm nozzle but based on user feedback it can be printed with a .4mm with no issues but your results may vary. I made the core model Parametric but all the…
Print it lying on the grill "teeth" with regular supports. You may get away with wave overhangs or just straight up with regular overhangs though.
Files and how many of each you will need to print: 1x Xeneon edge front mount - Main part A 1x Xeneon edge front mount - Main part B 2x Xeneon edge front mount - inner support Optional 2x Xeneon edge front mount - internal cover A 2x…
24pin closed cable comb for the Corsair 4000D case (old version). Used with MDPCX sleeving and 17AWG wire.
24pin + 8pin and 4pin closed cable comb for the Corsair 4000D case (old version). Used with MDPCX sleeving and 17AWG wire.
This model was printed on a prusa mk3s+ with PLA+. It took 133g, 43m, and 13 hours to print. You can mount the intake with the extra hardware provided by corsair with the case. 2 fan screws and 1 ssd plate mount screw (2nd smallest screw…
Supports a card inserted into the vertical riser slots on the Corsair 4000D. The holes are aligned for the front vertical slot and a LINKUP - Ultra PCIe 4.0 X16 Riser Cable . There's a mounting hole that will get attached to the case to…
very easy to print supports not needed infill 20%
I know it's been done already since there are 3D printed replacements for these online but I couldn't find a STL file. So I designed one by myself. This TPU holder locks the reel on the Akai 4000DS reel to reel. It is not an exact…
ready to slot in to the verticle slot on a corsair 4000d with a 800x480 screen
I have OCD for the Corsair 4000D. So I made a cover plate to cover the big hole for the radiator. The slot in the front is for a 20 x 2 x 5 magnet if you so desire. Print instructions I used the Prusament PETG signal white at 240-250 and…
I've noticed that Corsair only includes two SSD mounts in their Corsair 4000D Airflow case but offers four spots to mount them. Since I have some additional drives laying around and need those four slots, I jumped into CAD and copied the…
I printed them in PETG, 0.20 layer height and 30% gyroid infill with 90% infill modifier on the screw interface (import 3mf file in prusa slicer to get the modifier). You can re-use the rubber part from the original you are replacing, or…
I wanted a place to attach things to the bottom of the case, and I found a version, but it was only a mesh file. I modeled this in Fusion, with no reference to any existing designs. Use auto orient and tree supports
OnShape Link Currently the model is split up at the main points so that it could be printed on my Bambu Labs X1C. There is room in the upper and lower frames for 8mm x 2mm circular magnets. The exhaust hole is setup to be allow 5.9 inch…
Inspired by StawiamKlocki_pl 's G5 mini PC case for the Raspberry Pi 4B. This model aims to emulate the Corsair 4000D/5000D PC case for use as with an RPI 4B. Required 4 x M2.5x4 1 x Raspberry Pi 4B 1 x Clear plastic square 92mm x 70mm x…
Vented cover plate for the 4000D Airflow Mid Tower Case. Compatible with 120mm fans.
Inspired by StawiamKlocki_pl 's G5 mini PC case for the Raspberry Pi 4B. This model aims to emulate the Corsair 4000D/5000D PC case for use as with an RPI 5. Required Print the PiMount5 from this model and also the front cover and case…
The purpose of the intake is to help the GPU getting fresh air. I haven't done any benchmarking to prove it works, but the poject was fun. The intake is mounted on the fan and the case. There are a few little screws that came with the…
