Walksnail Goggles X Extension Module Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the Walksnail Goggles X Extension Module. Mounts to the top of the goggles.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 117
- Makes
- 0
- Views
- 761
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Summary:
A mount for the Walksnail Goggles X Extension Module. Mounts to the top of the goggles. Uses a two piece design leaving only a low profile mount when not using the module. With the low profile mount it still fits nicely in the goggle carrying case. The extension module slides and snaps in easily to the mount. Included photo has it installed on my goggles with the Foxeer Wildfire analog module. 3MF, STLs, and .bgcode for the Mini+ included for printing.
Print Settings:
- I used Prusa Mini+
- I used Flashforge burnt titanium PLA filament
- 0.2mm resolution
- 15% infill
- 2 walls/perimeters
- Definitely needs supports for the curve on the goggle mount and the locking ramp tabs
Assembly:
Just need to remove the supports from all parts and add the double sided tape to the goggle mount. Then everything should snap together nicely using the locking ramps. Link to the double sided tape I used: https://www.amazon.com/gp/product/B07TJFGXT6/?th=1