VoltLog VoltLink case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case for VoltLog's VoltLink USB to serial adapter / programmer
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 71
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
Case for VoltLog's VoltLink USB to serial adapter / programmer.
Required hardware:
- VoltLink revE board (I'm not sure if other revisions are compatible)
- 4x M2.5 x 3mm threaded inserts
- 4x M2.5 x 10mm screws
A variant bottom is provided that you can screw into directly without the inserts (untested).
A lot of FDM printers can't do the legends on the top justice, so it's provided both with and without them. There's a slot in the bottom so you can always see the header legends on the PCB.
Frequently cycling the “VoltLink connector” on the top might be a little inconvenient with the lid on due to how deeply shrouded it is. I only use the 0.1" header myself so I didn't put a lot of thought into it.
The PCB should be 1.6mm thick.
You can use silicone or glue to add diffusion to the light pipes.
The example in the photos is a v35 and was printed using JLCPCB's MJF nylon service. I haven't actually tried to print this with FDM, but it should do OK. The screw counterbores and the USB-C connector slot probably require tiny supports.
Links:
- Videos about VoltLink on VoltLog's YouTube channel
- VoltLink GitHub repository (Gerbers + BOM)
- Purchase VoltLink pre-assembled from VoltLog's Tindie shop
Change history:
- v35 – 2025-07-30 – Removed unnecessary evacuation holes. Adjusted dimensions for threaded inserts. Deepened and widened top screw-hole bores.
- v31 – 2025-01-18 – Initial release.