UE Megaboom 3 / 4 Wall Mount (double-sided tape)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple holder for UE Megaboom 3 or 4 to fix fix with double-sided adhesive tape. Two versions.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
I stopped uploading and updating my models here at Printables!
My actual models can be found on my MakerWorld profile – with print profiles.
Take care to use the newest models …
I needed a wall mount for my UE Megaboom 3 without screws, so I made one with a quite big base plate (10x6cm) to be sure it will stay on the wall. The Megaboom 4 has the same dimensions.
There are two versions, one has a flat side and the other has a .6mm recess to hide the modern 1mm adhesive nano tapes.
I used ABS but it should also work with PLA since the walls are 3.2mm thick. So it should be stable enough.
Printed with 4 walls. No support needed.
Make sure to clean the wall and the holder (I used IPA) and don't put the Speaker into the holder for 24h after sticking it to the wall.