Power2Max NGeco battery cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If you lost the battery cover for your p2m NGeco power meter, and you have a roll of TPU, then you're in luck.
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 111
- Makes
- 2
- Views
- 346
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Share Alike
Pretty self explanatory, I suppose – if you lost your this thing, you can print a new one. I printed mine from Siraya Tech 85A TPU on my Bambu X1 with the following parameters (attached .3mf file):
- 0.16mm layer height
- Precise wall and precise Z height on
- 25% gyroid infill
- 2 walls
- Fuzzy skin on contour, 0.3mm point distance, 0.15mm thickness
I modeled it in Onshape; here's the Onshape file: https://cad.onshape.com/documents/27ffd50c3a12700e0e81f976/w/69eadf75aaff3b9e6b64139f/e/a2a0ab484900a4a9c3ef3926?renderMode=0&uiState=678f1a9156cbc2326b0c5306
I hit mine with a garden hose today (picture is obviously from before I did that.) and it didn't seem to leak. Your mileage may vary… if you kill your power meter from water ingress it's not my fault. Now get back to racing some 'cross!