3" x 2" downspout to 4" pipe adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to connect 3"x2" downspouts to 4" pipe.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 135
- Makes
- 0
- Views
- 509
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
3d printable downspout adapter that slips over the downspout and can snap into 4" corrugated drainage pipe, or sit in a 4" non-corrugated PVC pipe.
These adapters are usually available at the hardware store and made of durable HDPE that weathers much better outside, so I recommend the store bought version if you can get it.
If you can't get a premade one, this should do in a pinch. This print can be much cheaper though - costing about 1/10th the price of the hardware store version. (As of 1/21/25, $12USD retail vs ~$1.50USD in filament). The topology is optimized for 3d printing, so there are no overhangs. I expect the freeze/thaw cycle will start ripping apart the layers in a season or two, so this should not be considered a good long term solution. (I'd love to be wrong though)!
I've included a parametrized f360 file, so you can adapt it to your own needs.
Printing tips
- No supports required
- Low infill (5%)
- Recommended layer height: 0.2 - 0.30
- Recommended nozzle size: 0.4
- Consider printing with a brim if you have adhesion issues.
Support me
If you enjoy what I'm creating and want to support my reckless & lackadaisical lifestyle, please consider buying me a coffee Your support goes a long way! Buy Me a Coffee?
Enjoy your spout and let me know, if you make one for yourself!
Designed with Autodesk Fusion 360 Personal