Counting matching models…
English These couplings or connectors are used to join two corrugated pipe sections that are used in electrical installations. Model files are available for the common pipe sizes DN20, DN25 and DN32. I experimented a little and created…
The sheets have a thickness of 1,2 mm, when using a 0.6mm nozzle you can use vase mode. Using a brim is recommended.
This set includes a variety of corrugated metal roofing panels—the familiar wavy style commonly seen on barns, sheds, industrial buildings, and rural structures. Designed with scale modelers in mind, these panels are ideal for adding…
English Recently I created model files for the straight connection of two corrugated conduit sections in the electrical installation. See also https://www.printables.com/model/1292339-corrugated-condiut-connectors . I didn't think bend…
A simple 4x4 half height Gridfinity tray with “corrugation” to keep tools separated. This was designed to hold tweezers and other short-ish tools. Tools are separated by a series of ridges. Half height to make for easy stacking.
Again simple attempt for parts for dioramas
I made a zero cost draft screen for my printer !. Used corrugated cardboard boxes lying around. Printed in PETG with 10% infill. One print is a set of 4 brackets Please like and return you comments. Category: DIY
These are HO scale corrugated board roof pieces that you can use when building models and buildings. Size is 3cm x 5cm. These are perfect if you don't want to purchase sheets of the stuff for a small project. They are thin enough that you…
Spacer for fixing corrugated metal roofing sheet - Distanziatore per posa tetti in lamiera ondulata Dimensions 40x23(+10)x17mm Cap-Washer Resize to adjust dimensionIf you download/enjoyed this file, please leave a like - Thks Category:…
Corrugated pipe for models, model railroads, etc... start as 15mm diameter by 50mm long. Category: Hobby
Corrugated plastic sheet, this stuff can get pricey, at least here in the US, now you can print your own and maybe save some $$$. starts as 100 x 100 x 5mm resize to your liking. If you need something really pacific feel free to send me a…
The wall clamp provides fixation for 35mm pipes or corrugated hoses. Designed with a 34.7mm clamping function and 11mm height. Hole for countersunk M5 Screw. Printed on my Prusa with: 0.3mm layer height, 50% infill 0.4mm nozzle.…
This model forms a solid base that will allow you to mount lights on a specific pattern of corrugated metal siding. See the pictures in order to understand how this is used to hold the light and the pattern of metal siding that it will…
Original design was not tight enough for my needs so I resized it to 2.5mm thickness and increased the height to 30mm (also the original 15mm height is included)
This is my go-to phone holder. I have one in my office holding my work phone [iPhoneXR w/ OtterBox Commuter case pictured] as well as another on the dining table. It's great being able to comfortably see the phone in portrait mode while…
I really liked the vase mode playmat tubes created by Tekcor17 , but I found printing them with an 0.4mm nozzle was too weak for my liking. The original models didn't fit together when I printed them with a larger nozzle, so I rebuilt…
Small clip to prevent the corrugated conduit to come out of the electrical box. Slide in the corrugation and stay in place. I printed them in PETG for durability.
Convenient adapter for connecting corrugated conduit (iD 17mm, oD 21.5mm) with Haupa PG-16 cable gland. Printed without supports. You can use the zip ties to additionaly secure the conduit.
An artistic trophy or award. It could be an aesthetically pleasing decoration or ornament. It should print without supports - assuming reasonable printer bridging. Please "Like" this file, if you collect or download it. There is a rounded…
After a branch fell on my chicken roof and punched a hole through the corrugated roof. Rather than buy a new panel and waste most of the material, I modeled a small patch to repair the hole. Print with PLA and supports from the bed only.…
This is a clamp for 25mm diameter corrugated tube. You just need to print two times the same model and they join using M3 screws and nuts clamping the tube in the middle, thanks to the ribs on the clamp the tube can't slip. Using the…
3mm acrylic panels are a significant cost . It is cheaper to use coroplast (corrugated plastic) for some (or all!) of the panels of the enclosure. Coroplast also cuts easily and insulates very well. The only gotcha is that typical…
My CanBus corrugated tube was banging on the side panel every time the X axis moved near it. So I joined the filament bowden tube and the corrugated CanBus tube with a simple clip to circumvent the issue. It worked :) This is the…
For the smaller corrugated roofing material from DIY stores. Maybe specific to the german Baumarkt scene, I can't tell. The sine was projected from a spiral; Fusion 360 source included. Scaling to any other sine specification should not…
This replacement part is part of the Festool rotating adapter for D50 corrugated pipes (452896 if I'm not wrong). It threads on the end of the D50 pipe, which allows it to secure the rest of the rotating adapter. It seems this piece is…
I designed this corrugated pipe fidget, drawing inspiration from... flexible sewage pipes! I printed it using ROSA-Flex 96A), which gives it that satisfying, rubber-spring feel. Its pocket-sized design makes it a great stress toy and the…
I needed some roofing panels for a 1:20.3 wheel car I was making so I made a press for index cards etc.
Box, tray, bin, container… Dimensions: 20 × 15 × 8 cm Designed to be printed in vase mode or with a few perimeters, 0% infill, and no top layers.
A spacer for corrugated roofs height: 21 mm width: 42 mm depth: 25 mm diameter: 40 mm I just needed three more spacers and did not want to buy 50 at the DIY store. After it was finished I found a few spare ones in an abandoned drawer……
Two different sized corrugated plate static mixers designed for use in 1-1/2" SCH40 PVC pipe. Category: DIY
Allows the Ubiquiti U7 Outdoor (U7-Outdoor) and U7 Pro Outdoor (U7-Pro-Outdoor) to be mounted on corrugated metal siding, specifically with a 2-2/3" spread and a 7/8" rise (see photo). This mount is compatible with both the Ubiquiti U7…
Cable holder for attaching corrugated tubing to the wall, indicated to route your solar panel cabling to the junction box. Holds Corrugated tubing with zipties Print on the side in ASA or PETG. use inox screws to hold to the wall.…
This double clamp is designed to provide a secure and reliable hold for 25 mm corrugated pipes, ideal for VVS installations, electrical conduit management, and other similar applications. Robust design with two mounting holes for a secure…
I needed to connect a corrugated tube to a PVC pipe through a joint so I made this quick adapter. It fits loosely on a joint for 32mm pipes and snugly on a 23mm tube (external diameter of 28). If you want a better seal you can place an…
I built this to change from 4" corrugated drain pipe to 3" pipe. Normally you want to go the other way around, but in my case, I had reasons to want to run 3" pipe, and since the pipe is fed by a 3"x2" downspout, I figure there's no…
We're using them to play hockey
This connector is designed to join two ends of an air conditioner drain tube. It was developed because the corrugated tubing was damaged and could not be replaced. The connector ensures a secure connection between the two tube ends,…
A 1:48 Scale Corrugated Steel A Frame Structure on Square Tubing
Solar Panel Mount for Corrugated Roof -Adds point of contact for the corrugated roof and the rail mount. Printed with ABS. Installed November 2019.
Motivation This 3D model was designed to facilitate a more ergonomic connection between a portable AC's corrugated pipe and the recuperator hole. The goal was to achieve a comfortable angle, thereby conserving the length of the pipe and…
Seal the pipe end with this TPU lid. Fix it with a zip tie on demand.
There are several corrugated tube dimensions from each available supplier, while these pieces may not have the ribs perfectly aligned with each supplier model geometry, they nonetheless exert sufficient force to prevent tube movement when…
Roof/Railing Patch -Repair _____________________________________________________________________________________________ This Customizable patch can repair your broken corrugated roof or railing. You can set your own dimensions with FCStd…
A 1:48 Scale Corrugated Steel Wall on Square Steel Tubing
EN Corrugated conduit connector for 75mm diameter pipe. Connector has two click positions in each side of connector. This model was modeled for only home use only and inspired by original part. CZ Vlnitá spojka pro trubku o průměru 75 mm.…
Junction Box PLUS - M16 corrugated conduit windows Windows to directly connect M16 corrugated conduit Compatibility Junctionbox PLUS - Full Set Junctionbox PLUS - 30mm Set Junctionbox PLUS - 40mm Set
I wanted to create dividers in my 13" cube storage boxes so I cut some pieces of 4mm corrugated plastic and notched them, but that didn't keep them straight, so I designed this piece to hold them together. Easy print in PLA, no supports…
The motivation for creating this end cap was the annoying whistling. On a family house, we installed pre-wiring for exterior shading blinds. The corrugated conduit we used will be placed under the facade insulation. Until then, however,…
if you don't want to buy corrugated plastic for the light saber, you can print this file in clear filaments. print with 0 top, bottom layer and infill. Vase mode also works
I designed and made these to enable easy connection of corrugated plastic sheets, in this case used for my father-in-law's greenhouse walls. Probably better made of ASA Prusament to withstand outdoor conditions.
Very simple deign, available for 1,2,4 conduits with a single screw, supported dimension 20mm diameter
An artistic sculpture. It could be a shelf sculpture, vase, plant pot, trophy or award. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or…
I needed it so i made it :) Nothing special.. 100% infill PLA
Hi, I design this clip to fix a 4 cm corrugated conduit to the wall. The clip can be fixed with a 6mm wall plug , or with glue if you find a glue suitable to attach the clip to the wall. The strange base and the hollow at the base are…
This is a 90 degree, long sweep elbow for 3" corrugated drain pipe such as can be found at Home Depot or Lowes. They sell drain pipe elbows there as well, but they seem to have female ends on both ends, rather than a male and female, so…
🇩🇪 Klemme für Wellrohr / Installationsrohr Diese robuste Rohrklemme ist ideal zur Befestigung von Wellrohr oder flexiblen Installationsrohren an Wänden, Decken oder anderen Oberflächen. Perfekt geeignet für Elektroinstallationen,…
The parts are printed with PETG and do not need supports. To connect both parts, use 2 rod ⌀2mm with rectangular bended ends.
Printed in PLA - top side down with supports. Fixes to shed with Hex head bolts which recess into bracket. NOTE: Not intended for massive weights. Test bracket strength with weights prior to loading with heavy plants.
I needed two 4 inch and one 6 inch corrugated drain pipe grates but the 4 inch ones at the box stores were a combo 3 & 4 inch unit with a hole opening of only 2 3/4 inches (not much use for water flow) and both need a outer ring in my…
Print these with the same settings as the normal segments - 1mm walls and 0.15mm layer height in vase mode. I took the original 2.5in hose segments and extended them into longer straight segments. This way you can cover more ground with…
Warning: The current version of this belt broke after just a day and a half of use. The limiting factor appears to be tensile strength. To address, I'm considering polycarbonate filament and/or even thicker extrusions. Use the models that…
This model is a 3D-printed adapter designed to connect a vacuum to a corrugated conduit (TPC 90) — the flexible underground conduct commonly used for cables in France. Purpose The adapter allows you to use a TPC 90 corrugated conduit as a…
Junction Box PLUS - M25 corrugated conduit windows Windows to directly connect M25 corrugated conduit Compatibility Junctionbox PLUS - Full Set Junctionbox PLUS - 40mm Set
Pretty simple. It fits and holds about as well as the fitting you can buy for this pipe, which is to say snaps on but is pretty loose. This is drainage pipe that water leaks into, and once it's buried in gravel, it has nowhere to go I…
Reducing adapter for KOPOFLEX corrugated conduit (40 mm to 16 mm)
Two versions of a corrugated artistic vase. One is a version with ribs, the other is a spiral twisted version of the same file. Please "like" this file if you collect or download it. Print Settings Printer Brand: MakerBot Printer:…
DESCRIPTION Remix of : Blank Insert Reinforced Lids by ImprovedByDesign Tool Holder For Multi-function Tester - TC1 Compatibility: Compatible with size 2x3x6+ Double Lip Corrugated Gridfinity Light Bins and the original Corrugated…
Input for a 16 mm corrugated pipe
This is a Y fitting that allows joining 3" corrugated drain pipe into a 4" pipe. You'll have to excuse the main photo - I had a design problem when printing (2 components of the design were not fully connected to each other). The attached…
The Inspiration & The Problem 🤔 I am a huge fan of the Double Lip Corrugated Gridfinity Light Bins by ImprovedByDesign . The double lip feature is amazing for adding inserts, which saves a lot of material, and the corrugated walls give…
An interesting little bowl that seems to vanish at just the right angle i printed mine with supports touching build plate
Grommet for corrugated plastic (corflute) A grommet for corrugated plastic to prevent tear out when holding it up with rope. The inside accepts up to 4mm cord. Drill a 5mm hole in the corrugated plastic and insert the grommet, glue the…
I got several sheets used corrugated iron with holes in it. This kit is to seal the holes. Use silicone to glue it on.
Fix damaged auto/car corrugated hoses. I needed it for a 74mm corrugated hose, but it can be used scale tool at the slicer and can be adapted for other size hoses. I recommend printing with PETG or with ABS plastic if the temperature is…
This is a remix from @HandsOnKatie_827995 prints ( thanks ! ) Adapted for vertical corrugated sheet wall.
Connector for 150mm corrugated air vent pipe. May be a bit sturdier than necessary.
Mount to attach the PtLevel gauging device to a Pioneer Tank corrugated roof. Secured to the roof with 3M VHB. 3mf model is set for solid infill in the 4 corner screw attachment areas. Like the freebie? Please review and share your Make :)
An artistic sculpture. It could act as a shelf sculpture, trophy or award. This model was NOT created with any use of AI. It is designed to print without supports - assuming good bridging on your printer. If you collect or download,…
I designed these to allow me to clip corrugated plastic panels (3mm thick) to my kid's CrazyForts kit. I recommend printing these out of PETG, due to it's high ductility and impact resistance.
Also needed: <4mm width cable tie 2 pcs M3 nut 2 pcs M3x8/10 countersunk
Simple funnel with paper filter in it cause very low flow because the filter is attached to the sides. I need it to get purified water from clothes dryer. So I designed this high flow funnel for (paper) filters. Print it vase mode…
Für den Gartenpool meines Sohnes sollen ein paar Solarthermiemodule angeschlossen werden, um das Wasser etwas zu erwärmen. Der sonnigste Platz ist das Dach auf der Garage, wo die 4m langen Module auch nicht stören. Das Dach ist mit…
This is a "click" holder type for corrugated tube. It's made for m10 conical screw and 25mm Corrugated tube
An artistic sculpture based on a fractal design. It could be wall decor, a sci-fi prop, a terrain prop, or an artistic shelf model. This model was NOT created with any use of AI. It is designed to print without supports. If you collect or…
spojka na spojení bez protahování kabelů pomocí zdrhovaček
An OpenScad script to generate a corrugated sheet in various standard sizes HO, Z, tt, s etc. Underside can be corrugated or flat Use the OpenScad Customizer
i printed mine with this dual color (gold/silver) PLA, i did not use supports but i think they could be useful if you use only touching buildplate to elevate quality. Enjoy
spojka na spojení bez protahování kabelů pomocí zdrhovaček, Y tvar
A minimalistic version of a squarish plant saucer. Printed in vase mode, and the corrugation makes it a bit sturdier. Seems to hold water, but check before use. 0.4 nozzle, PLA.
I needed two 4 inch and one 6 inch corrugated drain pipe grates but the 4 inch ones at the box stores were a combo 3 & 4 inch unit with a hole opening of only 2 3/4 inches (not much use for water flow) and both need a outer ring in my…
UNTESTED. This is a Corrugated sign board insert rail. I'm using these to place in my 3D printer enclosure.
Simple tray to allow residual moisture to drain out. For simple cups or bottles that can stand without rack support. Ridges are rounded for easy cleaning if required. I wanted a simplistic design without clutter. Used marble PLA to match…
Spacer for any weedeater with 28mm pipe and below 14mm corrugated hose . ASA or PETG recommended works just fine with PLA too 15% infill | support recommended M3 bolt and nut needed.
This is a roof spacer for Suntuf plastic roof sheets. I designed this because I couldn't find any parts relating to this specific style of more angular panels, as opposed to the more wavy, rounded panels. I only needed a couple of these,…
Customized version of http://www.thingiverse.com/thing:426709 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=426709 Instructions Using the following options: _stroke_thickness = 1 _edge_cap_height = 1…
Fits a 13 mm cable. Roof thickness is 1.5 mm. Category: Outdoor & Garden
My brother needed connector for corrugated pipes in garage so i made this one. Printed in PETG, no supports, 3 walls should be enough.
