vacuum to corrugated conduit adapter (tube adapter 35mm to 90mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model is a 3D-printed adapter designed to connect a vacuum to a corrugated conduit (TPC 90).
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 0
- Views
- 166
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a 3D-printed adapter designed to connect a vacuum to a corrugated conduit (TPC 90) — the flexible underground conduct commonly used for cables in France.
Purpose
The adapter allows you to use a TPC 90 corrugated conduit as a long, rugged vacuum hose, perfect for:
- Dust extraction in workshops or garages,
- Cleaning or vacuuming through existing buried conduits,
- Extending the reach of your shop vac with inexpensive, durable tubing.
The adapter can also be used to pull a cable through a buried conduit by suction, making it easier to feed wires or pull cords through long corrugated conducts.
The adapter can also be used to pull a cable through a buried conduit by suction, making it easier to feed wires or pull cords through long corrugated ducts.
Features
- Fits standard 35 mm vacuum ports
- Female connection on both sides:
- Small end → slips over the vacuum’s male nozzle (Ø 35 mm)
- Large end → fits over a 90 mm corrugated electrical conduit
Recommended print settings
- Material: PLA, PETG, or TPU (PETG gives the best durability and sealing)
- Layer height: 0.28 mm
- Perimeters: 3 – 4
- Infill: 30 – 40 %
- Orientation: Print with the large TPC side on the bed
- Supports: Not required