vacuum to corrugated conduit adapter (tube adapter 35mm to 90mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is a 3D-printed adapter designed to connect a vacuum to a corrugated conduit (TPC 90).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a 3D-printed adapter designed to connect a vacuum to a corrugated conduit (TPC 90) — the flexible underground conduct commonly used for cables in France.
Purpose
The adapter allows you to use a TPC 90 corrugated conduit as a long, rugged vacuum hose, perfect for:
- Dust extraction in workshops or garages,
- Cleaning or vacuuming through existing buried conduits,
- Extending the reach of your shop vac with inexpensive, durable tubing.
The adapter can also be used to pull a cable through a buried conduit by suction, making it easier to feed wires or pull cords through long corrugated conducts.
The adapter can also be used to pull a cable through a buried conduit by suction, making it easier to feed wires or pull cords through long corrugated ducts.
Features
- Fits standard 35 mm vacuum ports
- Female connection on both sides:
- Small end → slips over the vacuum’s male nozzle (Ø 35 mm)
- Large end → fits over a 90 mm corrugated electrical conduit
Recommended print settings
- Material: PLA, PETG, or TPU (PETG gives the best durability and sealing)
- Layer height: 0.28 mm
- Perimeters: 3 – 4
- Infill: 30 – 40 %
- Orientation: Print with the large TPC side on the bed
- Supports: Not required