1 / 4
Corrugated sheet spacer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacer for corrugated sheets (roof)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 79
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Share Alike
A spacer for corrugated roofs
height: 21 mm
width: 42 mm
depth: 25 mm
diameter: 40 mm
I just needed three more spacers and did not want to buy 50 at the DIY store.
After it was finished I found a few spare ones in an abandoned drawer…
Printed in PETG, because it gets quite hot on a roof. It is meant to be used with plastics corrugated sheet roof tiles.
The first try failed, I had activated brim, but the shear forces during printing were too much and it was torn off the plate halfway through printing. With the organic supports attached at a few places it worked.