1 / 4
T Nut for SawStop PCS Table Saw
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tnut that fits in the miter slot on a SawStop PCS cabinet saw. Designed for an M6 bolt.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 64
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This fits just right in the miter slot on my SawStop PCS cabinet saw. I use two of them to attach a featherboard.
I think PETG is better than PLA for this application, but either should work fine. I designed it for an M6 bolt, but a ¼ inch bolt will probably work as well.
There is a thin sacrificial layer to make printing easier without supports. You can cut it or drill it, or just push the bolt through.
Dimensions in the drawing are in inches.