Filament Spool Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spool holder with possible adjustment and displacement according to the spool width. possible storage in IKEA box SAMLA.
- Rating
- 4.8 / 5
- Likes
- 248
- Downloads
- 1,353
- Makes
- 16
- Views
- 8,366
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
spool holder filament printed with minimal filament consumption.
holder suitable for IKEA SAMLA box 39x28x28 cm / 22 l The box can then hold 4 spool filaments.
can be used separately and the number of spool filaments depends only on the length of the aluminum tubes.
The holder is suitable from a spool diameter of 12 cm / 4.72 in and a filament spool side wall width of max 5.5 mm
Slide the individual parts on top of each other and freely change the width of the holder according to the filament spool.
When using a longer aluminum rod, you will use the end piece as a support.
To use the holder in the SAMLA box, you need 2 pieces of aluminum bars with a diameter of 8 mm. length of aluminum bar is 30cm / 11.81 in.
If the holder is in the SAMLA box, a 1L silica gel will fit into the box so that it does not interfere with the filament.
non-printed parts:
- ball bearing 608 2RS oder 608 ZZ
https://www.aliexpress.com/item/4000029942618.html
or in your hardware store.
- aluminum rod diameter 8mm
You can buy aluminum bars at your hardware store. Better to buy full.
- SAMLA Box, transparent39x28x28 cm / 22 l Article number 801.029.76
https://www.ikea.com/cz/en/p/samla-box-transparent-80102976/