Pinecil Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box for Pinecil V2. It can hold Pinecil V2+cable+3 extra tips+2 soldering spools+sponge or scourer+holder+extra space.
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 58
- Makes
- 1
- Views
- 610
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What we will need:
- 6x M3x20 screw
- 1x M3x14 screws
- 1x M3 hex nut
- 1x 608 bearing
- All printed files (soldering wire spool; clampers are needed 2 times)
- Glue (optional)
Assembly Instructions for the Pinecil V2 Box
- Insert the 608 bearing into the holder and secure it with 1 M3x14 screw and an M3 hex nut.
- Place the upper inside part into the top part (with the logo). Optionally, use a small amount of glue to secure it in place.
- Secure the 2 clampers to the box using 2 M6x20 screws. Tighten them just enough so the clampers can spin freely.
- Place the lower inside part into the bottom part. Optionally, use a small amount of glue to secure it in place.
- Assemble the top part and bottom part by securing them with 2 M3x20 screws. Tighten them evenly, but don’t overtighten to avoid cracking the parts and make sure they spin smoothly.
- Screw in 2 M3x20 screws just enough so the clampers can lock the box.