Voron Exhaust Cover with PUG and PTFE passthrough
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Voron Exhaust cover with both PUG and PTFE passthrough
- Rating
- 5 / 5
- Likes
- 31
- Downloads
- 234
- Makes
- 2
- Views
- 1,520
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Compatible with the excellent Parametric Umbilical Gland (PUG): https://www.printables.com/model/378567-pug-parametric-umbilical-gland
I Wanted to convert my Voron Trident to umbilical and wanted the cable to go through the exhaust cover. I tried some of the angled passthroughs and didn't really like them. I've been using the LDO exhaust cover with a straight PTFE passthrough so I added a PUG mount to that. The model has the PUG on the left side, but you can mirror it in your slicer to move it to the right (as I did).
Use the standard Voron settings. 40% infill, 4 perimeters, 5 top/bottom layers. ABS or ASA.
If you already have the grill from the LDO or Voron cover you can reuse it.
Assembly is similar to the LDO original. In addition to the 2 M3 heatsets and 2 M3x8 SHCS you will need 2 more heatsets and M3x8 SHCS for the PUG holder. You may want to add some 1mm foam tape between the exhaust cover and the PUG holders. The cover is attached to the printer with the same M5x10 as the original.