(Remix) Tracer 9 GT Chain Slack Jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slight remix to measure to the center of the chain as per manufacturer instructions
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 83
- Makes
- 0
- Views
- 383
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I really loved the original idea, so simple and effective. But I noticed the OG measures from the chainguard down to the top of the chain. Yamaha manual instructs you to measure 45-50mm to the middle of the chain while pushing down on it.
I adapted the 46mm design to measure the correct distance.
The 3D printed spring tensions the chain down, instead of having to push the chain down with a finger. Adjust the chain tension until the edge of the side pieces lines up with the center of the chain.
Printing instructions:
Prints with tree supports on buildplate only.
Use PETG as PLA is too stiff and will likely crack (at the spring)