1 / 1
Indestructible MT10 Front Bumper
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A replacement front bumper for the MT10 V2
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 39
- Makes
- 0
- Views
- 164
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
A replacement front bumper for the Team Associated MT10 V2. Print in TPU and it will be indestructible.
The overhangs for this can be a bit tricky with TPU. I went the lazy route and used PLA supports (PLA doesn't stick well to TPU).
Re-uses most of the stock hardware. Does require 2x short M3 screws to secure the wire cover. If used with my TPU Front Braces you will need 2x M3x30mm screws instead of the recommended 20mm and with 2x M3 nylock nuts.