Ender 5 Plus Crossbar Variable Relocator
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This item allows for relocationg the crossbar at the front of the Ender 5 Plus, gives greater access to the print bed.
- Rating
- 5 / 5
- Likes
- 211
- Downloads
- 1,144
- Makes
- 20
- Views
- 6,761
- Reviews
- 19
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a bracket to relocate the front crossbar of the Ender 5 Plus to get a better view of the build plate. You may locate the crossbar at any height you find suitable for your setup.
Also consider printing the End Covers that protects you from the sharp edges that get exposed when you relocate the crossbar: https://www.prusaprinters.org/prints/116584-ender-5-plus-end-cover-for-used-with-crossbar-relo
The design is based on counterlever so even with only one screw at each side, it secures the beam firmly without having to tension the screw a lot.
This also means that before tension the screws, it is still a tight fit when pushing it down the 2020 beams (with the beam in place one side can be moved ~5mm before having to move the other side down 5mm, etc....)
The part is designed to be printed without support.
[REQUIRED HARDWARE]
2 pcs M5x20 screws that you unscrew when removing the crossbar.
[DONATIONS]
If you find that this item improve your daily life, consider supporting the creator with a donation.