1 / 4
Tumbler Sharpener Replacement Cylinder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement inner cylinder of the Tumbler Rolling Sharpener
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement inner cylinder for Tumbler Rolling Sharpener. The wood on the original is cheaply made and expands from humidity, permanently binding the cylinder with the sharpening wheels.
This is split into two parts so you don't have to remove either of the discs to install.
Hardware:
(4) M3x16 Bolts (I used socket caps)
(4) M3 Washers
(4) M3 Nuts
I used an oscillating tool to remove the original cylinder and made wedge cuts on each side until I could pry it off with a flathead.
Print vertical w/ supports.