Multiboard / UnderWare Small Thread Drill Guide
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.08 – €0.09 net (excluding VAT)
For file: Multiboard Small Thread - T-Bolt - Drill Guide_0.4n_0.2mm_PLA_MINIIS_5m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.09 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 5.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Small drill guide to ease in predrilling holes for mounting multiboard. Especially useful if used in an UnderWare setup.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 64
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
I got tired of having off-center and crooked predrill holes for installing the MultiBoard Core grids in my UnderWare (https://www.printables.com/model/941161-underware-the-ultimate-cable-management-solution) system, so I made this small drill guide based on the 9 mm Small Thread, Plain Head, T-Bolt
After printing, drill out the cavity with a your predrill size. I used 2mm.
The screws used in my case are 3.5 x 15mm countersunk TX20 screws.
Link to original license: https://www.multiboard.io/license