MSI RX 6700 XT MECH 2X 120mm Fan Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Swap out those piddly MSI fans for some REAL 120mm fans!
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 145
- Makes
- 0
- Views
- 1,040
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
I tried printing Interheater's model but it seems like theirs is only for the RX 6600 series cards as the heatsink is different from the RX 6700 XT. Loosely inspired by the aforementioned model, I whipped up this one from scratch in OnShape.
This adapter reuses the 4 tiny Phillips screws from the factory fan shroud. Use caution not to over tighten them in this model as you're threading right into plastic. To mount the fans onto the adapter, you'll need the standard Voron Threaded Inserts™ (M3x4x5). For the Noctua slim fans that I used, 18mm M3 button head screws did the trick.
Although printing in ASA is most likely overkill, I wouldn't print in PLA. PETG should be the bare minimum to avoid warping while installed on the GPU.
I specifically have the non-OC model of this RX 6700 XT and I don't know if the OC model uses the same heatsink, it probably does but please don't blame me if it doesn't.