34 models
This is a set of dummy batteries, on each of: 18650 with button on top (yellow) 21700 flat top (green) 26650 flat top (white) 26700 flat top (blue) I use these to make battery enclosures etc. They are safer than using real batteries,…
You can buy these connectors. But printing them is often faster. There is a two cell and a three cells version. Connect as many of them as you like, creating any battery size that can be larger than any print bed. The female side of the…
Capture Every Detail with the Sony A6700 Eyecup Camera Accessory Experience photography like never before with the Sony A6700 Eyecup. Designed to enhance your shooting experience, this accessory is a must-have for all A6700 photographers.…
26700 (2670) cell holder / cap / clip for Lithium ion and Sodium ion (Li-ion Na-ion) batteries!
Height is 3U. Fits in the ~9cm high IKEA Alex drawer (804.854.23). Has clearance with attached eye-piece.
I tried printing Interheater's model but it seems like theirs is only for the RX 6600 series cards as the heatsink is different from the RX 6700 XT. Loosely inspired by the aforementioned model, I whipped up this one from scratch in…
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
I always leave the Peak Design Capture Clip plates on my cameras, but also wanted to use this fantastic gridfinity bin for the Sony a6700! I've added two different versions - one should fit the smaller Peak Design Capture Clip plates,…
Broke the gear wheel from my blender after 4 years of abuse with frozen berries. The gears are going to see plenty of stress so 100% infill is recommended. Printed mine out of PETG, feel free to try different materials. I reused the old…
Extended version of a hot shoe grip for a6000 series cameras. This allows for some access to mode knob while not interfering with the standard Sony eye piece cover. Pictures show how the model fits on an a6600 and an a6300.
I made this press tool for 6700 bearing, this really helpful for RC cars, it allows you to push straith in or on the bearings.
Delonghi ESAM 67xx water tank funnel for easier filling of the water without removing the tank completely. Delonghi ESAM 67xx Wasserbehältertrichter zum leichteren einfüllen des Wassers ohne den Behälter komplett zu entfernen. Holder for…
Remix of this simple but great pulley using 6700ZZ (10x15x4 mm) bearings instead of the original 5x11x5 mm. See instructions in the description of the original model .
Sony in all it's infinite wisdom made it so you can't clip a Rode (or other) recording device to the hot shoe unless you remove the eyepiece cover. Really a genius move. This means that not only can you now lose your hot shoe cover… you…
3-Piece CPU. Has a die, IHS, and board
The IMCO 6700 trench lighter was designed for use in the trenches of war. You can find many originals, and there are reproductions on the market. This holder allows the lighter to be securely held on the Molle system webbing, while still…
This model is meant for lock sport purposes. Do not use it on a lock in use as it reduces the security provided by the lock. A piece designed to replace the original backplate of S&G 6700 Series safe locks. It is open allowing inspection…
This is a simple holder part of camera fan equipment for a6700.
Just bought a used TV. It was cheap, but the feet were missing. They were available online (even some 3D printed ones) but no STL. The interface to the TV is simple and i just made one myself. Its high enough to reach the manual controlls…
To use the case you must remove the broken clamp stub using a file. Print it in PLA .2 mm resolution.
This simple holder will let you mount Airtag to Sony A6700 camera when using dedicated Smallrig baseplate. To mount it you need to open the lever on your baseplate and slid two tabs into dedicated spaces starting with the "inside" tab…
26700 BATTERY CELL PACK Item Description: This custom 26700 battery cell pack features four high-capacity sodium cells, offering a versatile foundation for DIY energy builds. Whether you're targeting a 12V DC setup or combining multiple…
Just a quick edit to expand the original gridfinity A6700 holder modeled by josef.stehlik. Doesn't fit snug on purpose in case you have attachments on the side.
holder for Delonghi ESAM 6700 water funnel for water tank. Here are the LINK to the water funnel.
BMW r1200gs Covering Cap Left (part number 61317670033). This is the copy of the original part. The attached file is in STEP format, so you can create a new model based on this one. For example, I need to mount an extra button, so I will…
thumb rest tested with a Sony a6000. Bigger cutout and rest for the thumb for easy access.
Prototype printed with PLA, 1mm top and bottom shells, 5 perimeters, this makes the U shaped part of the holder sturdy enough. Slides onto 17.5mm headboard, dimensions can be adjusted in the source files or just drop me a message with…
Context Lithium Iron Phosphate (LiFePO4) technology is evolving rapidly. While the energy density is slightly lower than traditional Li-Ion, LiFePO4 cells offer a significantly better price-per-kWh and a much longer lifespan (often 2000+…
This is a Remix from https://www.thingiverse.com/thing:3595869 for https://www.thingiverse.com/thing:4670035 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 100 Infill: 50 Filament: DERSECO PLA…
Sony in all it's infinite wisdom made it so you can't clip a Rode (or other) recording device to the hot shoe unless you remove the eyepiece cover. Really a genius move. This means that not only can you now lose your hot shoe cover… you…
This simple holder will let you mount Airtag to Sony A6700 camera when using dedicated Smallrig baseplate. To mount it you need to open the lever on your baseplate and slid two tabs into dedicated spaces starting with the "inside" tab…
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
The CheeseMix Cage for sony a6700 is compatible with all CheeseMix plates and accessories. Featuring Arca Swiss quick release plate Integrated into the bottom. Twelve 1/4-20 mounting points (4 on the bottom, 3 on top, 3 left and 2 right)…
