1 / 2
MSI RX 6700 XT MECH 2X 120mm Fan Adapter — zdjęcie 1
1 / 2

MSI RX 6700 XT MECH 2X 120mm Fan Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Swap out those piddly MSI fans for some REAL 120mm fans!

Ocena
5 / 5
Polubienia
15
Pobrania
145
Wydruki
0
Wyświetlenia
1051
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

I tried printing Interheater's model but it seems like theirs is only for the RX 6600 series cards as the heatsink is different from the RX 6700 XT. Loosely inspired by the aforementioned model, I whipped up this one from scratch in OnShape.

This adapter reuses the 4 tiny Phillips screws from the factory fan shroud. Use caution not to over tighten them in this model as you're threading right into plastic. To mount the fans onto the adapter, you'll need the standard Voron Threaded Inserts™ (M3x4x5). For the Noctua slim fans that I used, 18mm M3 button head screws did the trick.

Although printing in ASA is most likely overkill, I wouldn't print in PLA. PETG should be the bare minimum to avoid warping while installed on the GPU.

I specifically have the non-OC model of this RX 6700 XT and I don't know if the OC model uses the same heatsink, it probably does but please don't blame me if it doesn't.

Tagi