1 / 2
magnetic 1/4" hex bit tool / holder for all round magnets (parametric file included) — image 1
1 / 2

magnetic 1/4" hex bit tool / holder for all round magnets (parametric file included)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.59 – €0.73 net (excluding VAT)

For file: Bit Tool with pause for 6x2mm magnet insertion.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.66 excluding VAT (range midpoint).

Weight reported by the author
12 g
Print time reported by the author
31.2 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Print your ultra-compact and magnetic bit holder for every application! Every round magnet will fit - no supports needed

Rating
0 / 5
Likes
47
Downloads
169
Makes
1
Views
514
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

Summary
Ultra-compact and magnetic bit holder for every application situation. The bit can be inserted easily and won't fall out.

Given .3mf file accepts widely used 6x2mm round magnets.
Accepts any other sized round magnet (up to 18mm diameter) per parametric Autodesk Fusion (.f3d file).

If you need any other magnet size and can't work with Fusion, please write me a message / comment and i will publish the needed file!

Compatibility
Fitting standard 1/4" / 6,35mm hex bits

Parametric .f3d variables for magnets
Magnet_Diameter - type in your magnet diameter (default: 6mm)
Magnet_Height - type in your magnet height (default: 2mm)

Print
- 0.2mm layer height
- use variable layer height (in my case +-0.06)
- 30% triangular infill
- 5 walls
- print in given orientation

Perhaps use a cylinder modifier in the middle with more infill for higher stability

Important: Add a pause at needed layer in your slicer to insert your magnet and resume print.

Assembly
Perhaps add a drop of oil in the hex socket so that the bits can be removed easily.

 

Do you like my work? I would be very happy if you would support my work on Ko-fi.

Tags