1 / 3
Low-Profile GE4C Bowden Tube Passthrough for 3mm Panels
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Compact GE4C bearing filament passthrough, maximizing range of motion with a minimalist, heat-set insert design.
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 72
- Makes
- 1
- Views
- 506
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a from-scratch redesign of “PTFE/Bowden Tube Passthrough with GE4C Spherical Bearing” by Mark Norris, maintaining the same footprint and hole spacing for compatibility while introducing key improvements.
Design Goals
- Full Range of Motion
The passthrough is designed for a 12 mm hole in a 3 mm thick panel, ensuring that the GE4C spherical bearing’s center of rotation is precisely aligned between the inside and outside surfaces. This maximizes the bearing’s range of motion. - Minimalist Exterior
The top half features heat-set inserts for M3 screws, ensuring the outside remains smooth with no exposed holes. - Minimal Interior Profile
The bottom half is only 3 mm thick, keeping it as compact as possible to minimize interference with the Bowden tube inside the enclosure. The other half is slightly thicker to accommodate the heat-set inserts. - Smooth Filament Path
The edges around the bearing hole are gradually sloped, preventing the Bowden tube from catching or kinking when moving against the printed surface.
BOM
- 1x GE4C bearing (i.e. 12x3 mm outer ring dimensions)
- 2x M3x8 mm FHCS (but M3x10 mm FHCS should fit too)
- 2x M3x5x4 mm Heat-set Insert
Print Settings
I recommend printing with standard Voron settings, but variable layer height improves curved surface finish if your slicer supports it. A lower infill density may also work.
- Layer height: 0.2mm
- Extrusion width: 0.4mm, forced
- Infill percentage: 40%
- Infill type: grid, gyroid, honeycomb, triangle, or cubic
- Wall count: 4
- Solid top/bottom layers: 5
- Supports: none
Notes
- I recommend making a small pilot hole using the drill template, then using a stepped drill bit to gradually widen it to 12 mm for the best fit.
- A bearing press-fit is optional since the printed halves will secure the bearing, but minimizing lateral play is still recommended.