Saddle bag/rear dynamo light holder for bicycles
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.80 – €2.20 net (excluding VAT)
For file: saddle_bag_holder-holder_0.2mm_PETG_MINI_2h19m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.00 excluding VAT (range midpoint).
- Weight reported by the author
- 20 g
- Print time reported by the author
- 2.31 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Attaches to the saddle rails with zipties and carries a rear dynamo light and a saddle bag (in better position)
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 30
- Makes
- 1
- Views
- 726
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
Print in PETG or stronger (ASA, Polycarbonate). Use 4 zipties to attach the holder to your saddle rails (the upper ones through the cutouts in the support rib, and the lower ones around the rail attachment and through the triangle so it does not slip off. You can use the two D-shaped cutouts or the slit between them to pull the straps of your saddle bag through (or you can install the saddle bag as usual). Bolt a dynamo taillight to the attachment points (fits a light with 50mm bolt distance).
This should provide a very visible location for your taillight and hopefully keep you safe. And also keep your saddle bag higher and in a more aerodynamic position.