Strong Ahh Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a strong hook. I made them to hold my guitars and other things.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 41
- Makes
- 0
- Views
- 200
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
This is a strong hook. I wanted to design a strong hook that doesn't use too much filament. I tested it up to 50 lbs in a very scientific test.
It did make some concerning noises at 50 lbs so I would recommend less than 40.
I printed mine in PLA with 10% infill and 6 walls. It is meant to be printed in the orientation the model is in. At an angle for max stronk.
You will most likely need brim to keep it upright, but NO supports. I used 6mm of brim.
This is a strong hook, but please be mindful of hanging expensive things on them. I use mine for my guitars, but I also have tested mine and how my printer printed it. Your results may very.