Follow Spot Stand Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple sleeve to convert the pin from a c clamp to a 1" pipe for a follow spot.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a sleeve intended to go into a piece of 1" schedule 40 pipe with the pin from a standard lighting c clamp (example). It should be a tight fit into the pipe and a loose fit on the sleeve, so that when a leko light is mounted to it, it moves freely like a follow spot stand.
In designing, I used pins from an ETC branded c clamp and assumed they'd all be the same, but it looks like Altman used slightly fatter and shorter pins that are not compatible. At some point I will upload a design that works with the Altman size.
If you'd like to double check the compatibility of your parts beforehand, the ETC pin is about 20mm in diameter and 70mm long (from threaded end to lip of flange). Anything longer or wider than this will not work correctly.