Counting matching models…
This is a remix of Cat Stretch by billyd. I used Meshmixer to reduce the mesh and create a voronoi pattern. I scaled it to 125% and printed it like that. If you would like to donate, please do it to the author of the original model as he…
Print approx. €1.33–€1.62 excl. taxPreliminary estimate for one variant
Easy to print with PETG
Print approx. €0.76–€0.93 excl. taxPreliminary estimate for PETGSource material: PET
Angle 25°, 75 massage points, non-slip surface, easy grip, tread surface 250x290mm. material PLA, PETG no supports
Print approx. €47.63–€58.21 excl. taxPreliminary estimate for PETGSource material: PET
Es una brida multihusos para sujetar plantas, cables o lo que se te ocurra y pueda con ello evidentemente.
Print approx. €0.29–€0.35 excl. taxPreliminary estimate for one variant
During long and frosty nights, this little piece of plastic will be a lifesaver in a fight against a thick peel of orange. It will help you quickly with peeling those small fruits, so that you will no longer get your hands dirty. Grab the…
Print approx. €1.57–€1.92 excl. taxPreliminary estimate for one variant
Coins for a few of the Open Source and Open Hardware projects I care about. Feel free to request more :) I have direct or indirect rights to quite a few, but not all, of the underlying logos. My usage is under free use. If you own or…
Print approx. €1.00–€1.23 excl. taxPreliminary estimate for one variant
This is a set of clips that let you mount Firehouse Technology 2-LED strobes to your DJI Mavic drone. There are 4 clips, 2 front facing, 2 side facing. Each of the “pair” is a left and right side. They mount on the arms and easily clip on…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
A simple hook to hang things from a bunk bed. Prints just fine in draft mode.
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for one variant
JetKVM 1U Rackmount with connection to a Ubiquiti UCG-Ultra/etc. Rackmount Option which i used before and be able to replace my empty right side. There are more options out there to combine it to. Use 2 M3 inserts and 2 M3 screws to…
Print approx. €2.85–€3.48 excl. taxPreliminary estimate for PETGSource material: PET
Had some trouble with wrapping that's why the box has the pattern on top and bottom.
Print approx. €3.86–€4.71 excl. taxPreliminary estimate for one variant
This fully print-in-place fidget boasts a variety of shapes for a satisfying squish and squeeze experience. You can choose between a circle, a triangle and a square. Print Settings: Make sure you have a lot of bed adhesion because the…
I updated my popular 10" rack mount for Lenovo ThinkCentre Tiny. It adds up to two standard keystone jack sockets, so you can bring Ethernet/USB/HDMI (or whatever keystone you like) to the front of your rack. I made some additional…
This is a scan of a small cat statue in a stretch pose. The statue was constantly being knocked off the window sill by our real cat who apparently didn't like the competition. The statue had some damage, so I repaired what I could and…
A fully parametric polygon fidget. Printing tips: Decrease the printing speed Decrease the cooling fan's speed For a robust handle use 3 walls Ensure a good bed adhesion How to customize your own? You will need to download FreeCAD , a…
From left to right on 2nd image; 1: Round Top 2: Flat Top 3-5: O-Ring Sealing, Plus Cutaways, SAE AS 010 and Metric 2x6mm O-Ring Sized Versions 6: TPU Printable O-Ring Insert for SAE and Metric Sized Caps (Insert so 45 degree angle faces…
Update 11 November 2023 By popular demand, I have a created a variation that hold CFA sauces on one side and their uniquely shaped ketchup packet on the other side. This is a sauce cup holder designed specifically to hold Chick-Fil-A…
This (very) fast-printing trading card storage solution has been specifically designed to print in ‘vase mode’ to allow for very low print times and economical filament usage. Each box holds approximately 400 standard size trading cards…
Build your own private candy dispenser with a custom trim! Update April 12th: Uploaded additional .stl (mod by tonitom )with a bigger screw and screw-casing. → The dispenser should be able to convey bigger candies like M&M's with this…
The Gridfinity TCG Organizer Are you tired of having stacks of cards spread around your house/apartment/room? I was, so I created this simple organizer that can be printed standalone or inserted into existing Gridfinity bins! With these…
Heyho I really haven't found a 100% satisfactory solution yet to keep my cordless screwdriver in continuous operation. (Mine doesn't have a factory fitted locking function for this and Velcro wears out quickly) Today I designed this…
Print just as you would a normal benchy, just with four different colors. In your slicer you can change the colors to whatever you want in the filament section. The Benchy_2 file adds 4 squares of each color with labels so you know what…
Cat Ring Holder I made this for my girlfriend and I think there are many other girlfriends of 3d printing nerds like me that would enjoy it :") It can hold many things: Rings, necklaces, watches, glasses (if scaled up big enough). The…
This is a ranger I designed in Desktop Hero, Fusion 360, and Meshmixer for my sister. It will need heavy supports, but looks great when finished. The bow is somewhat frail, so this file might be better used for online tabletop games…
UPDATE 2025-05-19: I have added 50mm high versions of the 3mm walls models. This makes the tool usable on objects with some unique or non-flat end surfaces. UPDATE: I have updated this design to include 6 different slot widths for both of…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Get your perfect antenna setup for your FPV drone. Mix-and-match from 80 frames, 50…
Quick design to cap a Luer-lock syringe with needle still on. Works best if you resize it to fit your particular needle, as there are a few different sizes, so I've attached the solidworks file also. So far it's the best easy and cheap…
Fully scaleable LOVING HEART that seems to fly. Very stable stand. Perfect for valentins day, birthdays, wedding and others. Material: PLA Layerheight: 0.3mm Infill: min. 10%
A hanger for B.C.D / Wing-Backplate, and other SCUBA gear. Designed after the Subgear design, that I can`t find anywhere anymore. The design also includes a mount for DIN regulators. I have included both an un-split version, for those of…
Built this so I could easily use hex ended drill bits for enlarging holes in my prints or just to use as a hand drill. Hex fit is snug. Printed sitting on open end with no supports. Print instructions Category: Hand Tools
I loved @BrookTrouts knife cover, and my wife was trying to get rid of the giant waste of counter space that is known as the "knife holder blob". So, I measured a few times, and came up with these. I recommend you measure your knife, then…
For me, a very good slicer profile (PrusaSlicer) for Anycubic Kobra series printers (2/2 Pro/Neo, etc.). Still undergoing my testing, but I already rate it as very good. Please ensure proper bed height and dimensions to avoid…
The model is easily scalable, which allows you to split it into as many parts as you can fit on your printer or scale it super small and put it on your keychain! I found that the layer height and infill don’t really matter as the model is…
Very simple test to print and manual adjust the level of your printbed (Adjust the offset) when you just installed your ABL or changed the nozzle. Adjust width and depth size in your slicer to match your buildplate but beware to not…
This is the biggest (test part) of JETCAT which is available on the official website https://www.printfully3d.com/ Don't hesitate, download, print, enjoy! EN Step by step user guide:…
NOTE! I have now designed several of these holders so this text is copied and pasted to each of them so the links work. The various holders are designed to accommodate bottles in a range of sizes and were originally designed specifically…
Here's my design for a filament / PTFE tube cutter. It has been designed to be enclosed inorder to keep fingers away from the blade. There are two designs one with a window so that you can see any marks you have made to cut to and one…
Helps guide the backplate on to the CNC shuttle. Built in supports can be removed by pinching the part and support together. Attach with 2x M3x6 BHCS.
Biete hier Stapelbare Kisten mit und ohne Magnete im Boden für 18ml und 200ml Flaschen von Vallejo oder ähnlichen Herstellern an. Die verwendeten Magnete haben die Maße 30x5x2mm I am offering stackable boxes with and without magnets in…
The Ultra Mega Super Duper Mega Tacticool Ketchup/Mustard Bottle Blaster 3000 MK1.0 Model X for 1:12 scale (6 inch) and 1:6 scale (12 inch) custom action figures as well as 1:1 scale life size props/cosplay Comes in 2 main versions: with…
As with my other holders: The lids fit well. Turn the holder upside down and shake it – the lid will not come lose. Print in PETG if possible. All holders have space for two or six blades, depending on how many you usually need of each.
My daughter and wife have been making string art projects for kids in the special needs community. They have to hammer in hundreds of small nails fairly straight and accurately placed. I came up with this nail holder that allows good…
Not a single drop of precious mayonnaise will ever be wasted The main part was printed vertically with supports (see image).
I tried other drawers, but none met my needs and the tolerances weren't right, so I designed my own version. The single model is 40x25x70 and prints in approximately 43 minutes + 21 minutes in vase mode with a 0.6 nozzle. After printing,…
Assembly instructions Print all parts. (Note: No support needed, but your printer should be able to handle 60 degrees of overhang) Prepare a thin foil e.g. Overhead film as shown in the picture below* * If you print the window version,…
20230216 Ver.2 Update: 1. remodel the overall appearance 2. add more directions of magnet 3. hygrometer will have one more install direction BOM： 1. glue (or change the XY hole if needed) 2. 6*3X10 magnets Print： PETG 0.2 20% infill…
Organizer for drill bits, screw bits, or other cylindrical items, based on Gridfinity. I made the dividers in two different depths for each length. 5mm and 9mm deep, where the 9mm matches the Dymo Omega Embosser (9mm). Printed i PLA on a…
It is a lifesaver for stretch foils Category: Hand Tools
Replacement knob for the fuel selector on many 2-Stroke Seadoo models. There are 2 models, one is a shorter version without the need for supports and a longer version modeled closer to factory. Both work fine, just personal preference.…
Cooling duct for the stepper drivers for my custom Voron build. It suites 6 or 7 steppers drivers. Pick the file you need. Note: didn't test the 7-stepper driver version, since my printer has only 6 (extruder is on the toolhead board).
This is a simple m30, 34 mm diameter, 28 mm length threaded cylinder to aid in transferring viscous liquids from one bottle to another, to avoid waste. This seems to fit a Whole Foods 365 conditioner bottle, a Dawn dish detergent bottle,…
Stretch Wrap Dispenser for Film Rolls of 1.5” Core Size. Cheap dispensers give no tension to the foil, or the whole foil falls of the dispenser. That is why I made that handle with the adjustable tension. Tension screw is even locked so…
Posture Corrector Yoga Cross Stick - Muscle Release Tool - Yoga Sticks - Stretching Tool - Giunzione Barre correttore Posturale Yoga Sticks Technical Specifications: Default Stick Diameter: 21mm Customizable: Easily resize/scale the 3D…
Made it in 3 pieces . Combined it is 600mm long . Lay it on the floor , position the upperbody over it and lay down with your spine in the groove , the lowerback on the highest part of the stretcher .( maybe you can turn it around and…
re designed to have a better fit, use this v2 file instead.
those are almost like the original model. but with a little bit of chamfer for easier installation.
Part of a set of Reloading tool holders/blocks that utilize Zach Freedman's Gridfinity system found here - https://thangs.com/designer/ZackFreedman/3d-model/Gridfinity%20Divider%20Bins-60721) One tool block includes spaces for L.E. Wilson…
My wife showed me a handful of the small sample perfume bottles stores generally hand out for free (or with a purchase). She had several that she likes and wants to have handy so she asked for a case to place on her vanity next to other…
This is a simple holder for fishing bait jars such as Gulp, PowerBait, Shoepeg corn, etc. Designed to clip onto the fore-transom (not sure if that's a real thing) and places them out of the cockpit and out of the way, but very handy and…
This was Every Flavor Robotics' demonstration to enter William Osman's 2024 OpenSauce convention. This robot was made possible with a MotorGo board, with built-in: - power management - motor controls - wireless comms - ESP32…
The idea is simple. And flexible. ( It's PLA, so it really is… ) While this looks like a cross - there is NO intended religious connection. Just to be clear. You are free to believe what you wish ;) However, it would also certainly work…
I needed a solution to quickly grab what I needed from my shelves and whipped this up. There are two versions; one with an extended base and one without. It works fine without if you aren't storing heavy items at the top. There are…
This double-length dinghy has four times the cabin for four times the fun.
After removing existing grips, unscrew bolt in bar end, remove washer from bolt and reinstall through bar extender and install new grips per manufacturer. Can be cut to length in slicer as needed, 30mm extension in the file. Printed with…
T antenna holder for any 2.4gh control link. This will fit any frame with 30mm standoffs, but specifically made to fit the source one 7inch V3 frame. March 28 update: 6mm standoff version added
Bring this feisty Farfetch’d to life on your printer. I modeled it to stay true to the classic look, complete with its iconic leek and that permanently annoyed expression we all love. The pose has some overhangs, so expect to use supports…
A DIN rail bracket for the Fysetc Spider controller with the possibility of adding a layer for two Fly Mellow 5160 pro stepper driver and fans. Each layer can use either m3 nuts or screws (see photos). No supports needed for printing.…
Still a work in progress. If you want a specific size/shape/hole count, please let me know in the comments.
This is a multipurpose soldering jig to help with soldering headers on a small selection of devices that I use a lot. This jig has slots for 20x1 and 20x2 (raspberry pi) standard 2.54mm male/female header strips (works for both). It also…
This is 3d model of a Suzuki jimny sz5. Print with sold infill or more perimeters for strength.
Enables use of these otherwise single use bags to bag garbage for kitchen, bathroom, etc. Double bagging recommended for organic food scraps. Place in a bucket or step-can for containment or odor control. Print instructions Print as shows…
8 x Link 4 x Cube A 4 x Cube B 16 x ~17mm filament(1.75mm) pieces Note: I reccomend using the big hole links and the cubes with the normal sized holes (CubeB is mirrored version of CubeA) 1. print the parts 4 x CubeA, 4 CubeB, 16 x Link…
Custom add-on parts for the LGB Mogul steam loco to install an ESU 5L LokSound decoder as well as a speaker. The holder My goal was to keep the loco in its original state as much as possible, i.e. the built in electronics remain in place…
A Gridfinity box 3 x 3 x 7 that I use to hold DSPIE tool boxes.
Parametric Dosing Scoop — Prints in Place, No Supports I needed a way to consistently dose a DIY electrolyte powder mix without reaching for a scale every time, so I designed this scoop. Most of the models I found required printing…
To free some space on my workbench I wanted to attach my Gophert power supplies to a shelf above it. So I designed these mounts which also offer the extra benefit of keeping these light and compact devices in place while being operated.…
Printed in XPETG Extrudr, 0.3mm layer height and 23% infill. For assembly: 8x M3x8 hex head screws 2x M5x25 hex head screws 2x M5 nuts 4x M3 T nuts
Tool that helps ballpark the tension for adjusting shifting/braking. Under development. May not work yet. How I Designed This Source image Based on the Park Tool BT-2 tool. Took measurements & guessed others. Assembly You'll need to print…
I built this after wanting to mount a bunch of single board computers and mini PCs into my rack, but not finding any solutions. There are 2U modular rack carriers, but nothing in 3U, which was more suitable for the kind of stuff I'm…
I needed to have a table that turned on its own to present my newest and latest benchy, it's not the most reliable since it uses a string to transmit the rotation but it works. I chose to use a string or the vibrations would be too…
This model shows pikachu holding a bottle of ketchup. The ketchup can be painted over though, to maybe be a soda!
Used to keep a pencil, eraser and 120 page A5 sketching diary together and protected while traveling, or at school. I printed my daughters in a tri-colour PLA on a 45 degree from the bottom edge to remove the need for supports in the…
Set of organizers
A Wallmount for Gateways from ETC
Armytek wizard etc lamp holder on helmet. Support no need. PETG full walls
FreeCAD project file on GitHub: github.com/…/freecad-course .
We tried to design a stretch roll and we hope that the piece looks like one It has a space to put a NFC tag and get an interactive keychain, you need to pause in height To the multicolor print, you must do a pause in height where the…
on the photo is just a down scaled version cause i don wanted to use to much filament
I designed this large scoop in Fusion 360 for moving pet food from the dog food bag into a plastic storage bin. The handle is designed to be beefy and it has held up after several months of use. It has dog bone embossed into the scoop,…
Print in PLA, 0,2mm, no support. You need 4 screws and nut, M3x8 or M3x6.
KDxGP STRECHR.SPL Check out my socials and other things at https://linktr.ee/KDxGP Like my creations? Consider buying me a coffee ☕ at https://www.buymeacoffee.com/KDxGP. Thank you! STRECHR.SPL comes in two different heights: 15mm and…
A centaur-shaped mechanical warrior for your TTRPG of choice. This could be a “Warforged” from Eberron , an “Anvilwrought” from Theros , or a “Clockwork” from Shadow of the Demon Lord . Of course, you can simply use it as a unique…
With this insert you turn your Bohning’s Multi-Fletcher® Jig into a tri-liner for vanes like Spin Wings™, Kurly Vanes™, etc.... It can be used for different Vane lengths. With the centimeter marking you can achieve a exact positioning of…
This puts the GPIO card under the wifi card, so the pins are low and at the back of the machine and easily accessible. The GPIO cable passes through the slot for the bed cables. MMU text included for Wifi and GPIO symbol. Uses 4 m3x10 (or…
A while back I bought a set of ribbons from Amazon, but they came packaged on a piece of polysyrene. Once the ribbon was opened it ended up in a tangled mess that drove me mad, so I designed and printed a spool to hold it all. This is…
This is a game piece box with a sliding lid. There are design options for the box bottom and lid to have a mosaic pattern or solid surfaces, and flat or concave/recessed faces (on the lid). All of the lids will fit either of the box…
2025.03.20 Edit to model, cleaned up geometry and a bit shorter.
![[updated 0216] Mijia(xiaomi) hygrometer Magnetic holder for bambulab X1/P1p/etc](https://media.printables.com/media/prints/372977/images/3334232_5fcc4f89-5016-4850-a3c8-5c499cae3146/ishot_2023-02-16_172115.jpg)
