Kenmore refrigerator cold stream blocker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hooks into the rails in the back of the refrigerator to prevent food from getting pushed into the cold stream.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Older Kenmore refrigerators with the freezer on top have a ‘cold stream’ in the back center of the refrigerator that will freeze any food pushed into it. This clips into the rail in the back of the fridge and prevents stuff from being shoved in there.
There's two variants, one with long legs, and one that's a half disk. On the bottom shelf of the fridge, the rails don't extend all the way to the shelf, so the long legs bridges the gap. The half disk should be fine for the top shelf. If you like to stack things that might topple, the long legs version would be better for the top shelf.
I included the f360 files if you want to tweak it.
I know my fridge is at least 20 years old, so i'm not really sure which models this applies to.
Please post any makes!
Printing tips
- No supports required.
- Low infill (5%)
- Recommended layer height: 0.2 - 0.30
- Recommended nozzle size: 0.4
- Consider printing with a helper disks on the tip of the arcs if you have adhesion issues.
Support me
If you enjoy what I'm creating and want to support my reckless & lackadaisical lifestyle, please consider buying me a coffee Your support goes a long way! Buy Me a Coffee?
UPDATE: Increased notch depth for better retention, and added negative space for the screw on the rail for the long legs variant. Removed older files.