1 / 4
The Goonies Magnet (multi-color)(8x3mm magnets) — image 1
1 / 4

The Goonies Magnet (multi-color)(8x3mm magnets)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The Goonies

Rating
0 / 5
Likes
27
Downloads
79
Makes
1
Views
212
Reviews
0

Updated at source:

Model information

Category
Kitchen
License
Creative Commons — Attribution — Noncommercial

Pictured Examples printed on a BambuLab X1C (Textured PEI)


Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

 

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). For this print, I think it was reversed, with the base being white, and the outline being black to keep the lettering white.


8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

 

Hope you enjoy!


(see my profile for other multi-color prints, as well as face-up manual color print designs if you don't have a multi-material option)
 

Tags