ModuBox_V1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- GNU General Public License v3.0
Introducing the ModuBox _V1
A box with a slightly different design approach, the hinges, and the locking mechanism are on the side panels of the box which are printed separately and connected to the lid and body of the box with M3 screws.
The lid and body are smooth and clean, without hinges or a locking mechanism. They can be printed standing up, saving space and improving print quality.
The lid and body have an additional magnetic closure option (the magnet holes can be closed or changed in the slicer).
the latches are “snap-on” and do not require additional assembly with screws.
***There is a model for only one set of the side panels, so it needs to be mirrored in the slicer—don't just copy it! The latch needs to be printed twice for both sides!
Tolerances: The tolerances are tailored to my specific 3D printer and settings, so your results may vary depending on your equipment and configurations.
Required hardware: M3 x 12mm Bolt (18 pcs, 8 for each side panel and 2 for the hinges) https://www.aliexpress.com/item/1005005204317611.html
If you want to check out my other storage box models, you can find them at the links below:
Let me know what you think in the comments! Happy printing!
Follow up on the updates, new custom parts & the upcoming photos of the print!