A Raspberry Pi 4 (RPi 4) Snap-In Case with optional Noctua Fan.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a fast and easy to print case for a RPi 4. The cover simply snaps-in making it simple to access the board.
- Rating
- 4.875 / 5
- Likes
- 48
- Downloads
- 888
- Makes
- 12
- Views
- 3,321
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fast and easy to print case for a RPi 4. The cover simply snaps-in making it simple to access the board.
It is compatible with all versions of Raspberry Pi 4.
If desired, you can add :
- 4 screws (M2.5 x 5) to secure the board. They are not mandatory as it is already a tight fit.
- A Noctua fan 40x40x10 like found here: https://amzn.to/321fz4E
Settings
I suggest using the following slicer settings:
- Layer height: 0.20 mm
- Infill: 35 %
- Perimeters: 4
- Solid layers : 5 (top and bottom)
- Supports: None
With these settings, you should end up with a 50 g print taking roughly 4h30 on a MK3/s :-)
Files
Look under the Files section for all STL models and GCodes for MK3/s.
Give feedback
I love feedback and comments!
Should you have any question about printing the design, ideas of improvements or just want to say Hi, please feel free to contact me using the Prusa Messenger or any other method :-)
License
I prohibit selling of this model for prices higher than the sum of all bare production costs (material & printer use).
Design by Régis Derimay - TiragesPro.