1 / 5
Impulse Oval Flush Button (for Imperial Ware toilets)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Impulse Oval Push Button for toilets from Imperial Ware Australia.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 27
- Makes
- 0
- Views
- 265
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
Imperial Ware Australia
In 2012 Imperial Ware Australia declared bankruptcy resulting in no support for any repairs or manufacturing of spare parts.
This print file is for one of their oval-shaped ‘Impulse’ flush buttons. Print this as an alternative to third-party kits that can cost over $100 AUD.
Specifications
- Part name: Impulse Oval Push Button
- Manufacturer: Impulse
- For toilets from: Imperial Ware Australia
Print Details
- Printed on a 45-degree angle for a smooth top finish. Also provides extra strength.
- 3MF File: Already has this angle/printing surface applied for you.
- STL File: Make sure to set the bottom print surface correctly.
- Image attached below:
- Supports are turned on but are probably not required. Note a brim should still be used.
- The 3mf file contains two buttons; one for left, one for right. Delete one of them if needed.
- The right button is 3mm longer than the left button; apart from that they are symmetrical mirrors.