1 / 4
Mr Miyagi Magnet (multi-color)(8x3mm magnets) — image 1
1 / 4

Mr Miyagi Magnet (multi-color)(8x3mm magnets)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mr Miyagi

Rating
0 / 5
Likes
4
Downloads
13
Makes
0
Views
75
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

Pictured Examples printed on a BambuLab X1C (Textured PEI). Had a little moisture issue with my white filament, please ignore that ;)


Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s

 

Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). I used the paint brush to manually add a few areas, like the headband, and some of the gray areas for the hair. Do it how you like it :)


8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)

 

Hope you enjoy!


(see my profile for other multi-color prints, as well as face-up manual color print designs if you don't have a multi-material option)

Tags