INSTAR IN-8001 Full HD Camera Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.28 – €1.57 net (excluding VAT)
For file: INSTAR IN-8001 Full HD Camera Wall Mount_0.4n_0.2mm_PETG_MINIIS_1h39m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.42 excluding VAT (range midpoint).
- Weight reported by the author
- 14 g
- Print time reported by the author
- 1.65 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple wall mount for the INSTAR IN-8001HD indoor camera.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 1
- Views
- 53
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you happen to be one of the few who owns an INSTAR IN-8001 Full HD camera, this wall mount might be for you.
Two screwholes allow for the holder to be mounted on a wall using 4 mm (shaft) / 7.5 mm (head) diameter countersunk screws (like, for example, those in the IKEA TRIXIG 200-piece wood screw set). Modify the FreeCAD model if you intend to use different screws.
The print in the photos was done on a Prusa MINI+ using Signal White PETG Prusament.
From the product photos, the wall mount might also be compatible with the newer IN-8401 2k+ WQHD model. But I don't have one at hand to test. Please add a comment if you do!