Eve Online Rattlesnake Hugeforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x149.97mm in size
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 14
- Makes
- 0
- Views
- 217
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x149.97mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA Nebula Antracite Transmission Distance: 3
PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Dark Gray
At layer #14 (1.2mm) swap to Ash Gray
At layer #18 (1.52mm) swap to Jade White for the rest.