1 / 4
Raspberry Pi 4b simple snap together case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Snaps together. No screw required. Raspberry PI logo fan holes with a 30mm sized fan and for access to the IO pins.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 26
- Makes
- 0
- Views
- 119
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
- Simple snap together case for a Raspberry Pi 4b.
- Snaps together. No screws required.
- Raspberry PI logo fan holes with a 30mm sized fan and for access to the IO pins.
Infill does not really need to be more than 15%, 10% might be good enough. No supports required when printed on the flat side down to the bed.