Grouchy Smurf Magnet (multi-color)(8x3mm magnets)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial
Pictured Examples printed on a BambuLab X1C (Textured PEI)
Face-down Print Settings:
Initial Layer Line Width: 0.4mm
Wall Generator: Arachne
Wall Loops: 1
Bottom Surface Pattern: Hilbert Curve
Infill: 15% (Gyroid)
Initial Layer Speed: 30mm/s
Coloring: Prints have at least two main objects that I usually set as white (base) and black (outline). I used the paintbrush to create a boundary of blue for the eyes/nose area, as well as around the eyebrows and hat line to allow me to then use the paint bucket to fill those blue areas easily.
8x3 Magnet recesses to allow gluing in the magnets easily (magnet strip can be used instead)
Hope you enjoy!
(see my profile for other multi-color prints)