APC PE66W Surge Protector under desk mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple underside mount for APC PE66W model Surge protectors
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 63
- Makes
- 0
- Views
- 293
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
I utilize a lot of APC PE66W model surge protectors around my office, and could never quite find a mount I liked. So I made my own.
This is designed to be mounted with 4 #6 ½" wood screws for the bottom side of a bench or desk. You could also use mounting tape for less permanent installation.
I have mine mounted into a Husky Workbench and it holds securely as seen in the photo. The mount themselves have a good amount of clearance, and when installed the strip can still move a bit side to side and up/down. If this is not desired, a bit of foam tape may snug this up.
Settings I used:
.2 layer Height
3 walls
15% Infill
No supports needed. Prints laying down.