APC PE66W Surge Protector under desk mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple underside mount for APC PE66W model Surge protectors
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I utilize a lot of APC PE66W model surge protectors around my office, and could never quite find a mount I liked. So I made my own.
This is designed to be mounted with 4 #6 ½" wood screws for the bottom side of a bench or desk. You could also use mounting tape for less permanent installation.
I have mine mounted into a Husky Workbench and it holds securely as seen in the photo. The mount themselves have a good amount of clearance, and when installed the strip can still move a bit side to side and up/down. If this is not desired, a bit of foam tape may snug this up.
Settings I used:
.2 layer Height
3 walls
15% Infill
No supports needed. Prints laying down.