1 / 3
Peggit - 5" Magnetic Screwdriver Holder for 60x10x3mm Magnets — image 1
1 / 3

Peggit - 5" Magnetic Screwdriver Holder for 60x10x3mm Magnets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The original Peggit 5" Magnetic Screwdriver Holder modified to work with 60x10x3mm magnets.

Rating
0 / 5
Likes
1
Downloads
11
Makes
0
Views
98
Reviews
0

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution

This is a slightly modified version of Robert Cowan's Peggit - 5" Magnetic Screwdriver Holder, changed to use six 60x10x3mm magnets instead of six 60x10x5mm magnets. I found 60x10x3mm magnets to be more widely available, and about half the price. The hold will, of course, be weaker, but it is still sufficient for many situations.

Aside from using different magnets, this holder works exactly the same as the original, using the standard Peggit clip and the same M3 screws for attaching the modified endcaps. Like the original, print the holder with the top surface facing down on the build plate.

The example pictured was printed on a Bambu Lab P1S using SUNLU PLA+ Black, at a standard 0.2mm layer height, with no brim.

Tags