Prusa i3 Noise Suppression Feet
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.10 – €1.35 net (excluding VAT)
For file: NoiseSuppressionFeet_Prusai3_0.15mm_PETG_MK3S_1h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.23 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 1.56 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Easy to print feet to help stop the printer transferring resonance vibration to the work table.
- Rating
- 4.882 / 5
- Likes
- 169
- Downloads
- 751
- Makes
- 31
- Views
- 11,529
- Reviews
- 34
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy to print feet to help stop the printer transferring resonance vibration to the work table.
If your new printer turned your table into a drum, you want these.
Cheaper, easier, lighter, and better looking than a slab of cement.
No need for supports, very easy to print. Gcode files provided.
I recommend PETG, ABS, ASA if the printer is used in an enclosure.
March 5, 2023
Updated print files with PrusaSlicer 2.5.0 supports for cleaner print.
Updated print files with PrusaSlicer 2.6.0 organic supports for cleaner print and easy to remove supports.
Added .3mf files per user request.