1 / 3
Fanatec Boostkit Omega apex mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds the usb connector and Fanatec Boostkit PSU of the Fanatec CSL DD one M4x16 or similar and one 4mm long insert need
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 9
- Makes
- 0
- Views
- 102
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Share Alike
Holds the usb connector and Fanatec Boostkit PSU of the Fanatec CSL DD one M4x16 or similar and one 4mm long insert needed. The screw pushes against the beam with the screw to hold it tight. The tolerances on the PSU and usb holder are a bit loose and could be 2mm more tight. I used Petg for the print. The insert was printed laying, but it would be smarter to print it standing.