1 / 2
HueForge Deer - Stag
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small HueForge model of a deer with a mountain in the background.
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 91
- Makes
- 0
- Views
- 409
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 70.31x125mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.4mm and the Actual Depth is 1.4mm
Filaments Used:
PETG GEEETECH BLACK Transmission Distance: 0.5
PETG GEETECH White Transmission Distance: 8.9
This print uses 2 unique filaments
Swap Instructions:
Start with BLACK
Border Only Colors from here until the end.
At layer #6 (0.56mm) swap to White for the rest.