1 / 6
Trays/holders for 18650 cells, 1 to 6 — image 1
1 / 6

Trays/holders for 18650 cells, 1 to 6

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

18650 trays

Rating
0 / 5
Likes
14
Downloads
83
Makes
0
Views
296
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Different trays for your 18650 cells to power your projects. Remember to order terminals as these wont work without them.

Combine these holders with a BMS and a USB-C charging board for easyness.

BMS (I used the 60A one to be sure it could deliver, I know my cells cant deliver that much, but then they're not the issue. Aliexpress is usually lying or exaggerating, so thats why I chose 60A over 20A): 
https://www.aliexpress.com/item/32852015245.html

USB-C charging board for 2s/3s/4s (I connected the + and - to the BMS):
https://www.aliexpress.com/item/1005006440373866.html

The 18650 terminals for the printed holders:
https://www.aliexpress.com/item/1005007812989899.html

Image reference for all 3 products in case they are removed from aliexpress
https://imgur.com/a/ycI4KjS

 

 

Instructions how to mount the terminals in the holders:

1. Place the terminals in the slot and push is slightly with your finger, be sure the soldering part is pointing towards the hole, sometimes it is not pointing towards the hole and it bens the wrong way.
2. Push the terminal down with a screwdriver or a tool that is flat in the end. I used a 3mm hextool like those cheap ones with handles aliexpress sells in a pack of 1.5, 2, 2.5 and 3mm.
3. Solder the terminal (all my holders are PLA, the heat isnt really an issue if your fast with the bolt, be sure to have good heat and dont keep the terminal hot too long or the plastic will melt).

Solder all the wires to the BMS. After you're done, double check the solder job and insert the cells.  

 

 

 

Tags