1 / 8
Artillery Hornet Z-axis webcam mount (more types of holder) — image 1
1 / 8

Artillery Hornet Z-axis webcam mount (more types of holder)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

It is used to move the camera simultaneously with the axis and offer interesting time-lapse videos.

Rating
0 / 5
Likes
5
Downloads
27
Makes
0
Views
159
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

EN: Mounting on the "Z" axis. Offers the possibility of anchoring the camera with the "Z" axis. When the print head rises, the camera rises with it and offers an interesting time-lapse video.
Unfortunately I don't have any better quality camera and neither another camera so I am not able to offer more mounting options. That's why I added a template model for customization.
In the future I will also add the possibility to mount the camera directly for RaspberryPi.

The model is designed so that no support is needed.

CZ: Úchyt na osu "Z". Nabízí možnost ukotvení kamery s osou "Z". Když tisková hlava stoupá tak kamera s ní také a nabídne tak třeba zajimavé časosběrné video.
Bohužel nemám žádnou kvalitnější kameru a ani jinou kameru tak nejsem schopný nabídnout více možností uchycení. Proto jsem přidal template model pro vlastní úpravu.
V budoucnu přidám také možnost uchycení kamery přímo pro RaspberryPi.

Model je navržen tak aby nebyli zapotřebí žádné podpory.

---------------------------------------------------

Mounting:

EN: Attachment is very easy, all you need to do is unscrew the "X" axis tensioner.
Then just click the top part under the wheel first and fold the bottom part under the bottom wheel (It might take some strength). Then just screw the tensioner wheel back in, unless it has been modified or replaced in the past.

CZ: Připevnění je velmi snadné, jediné co je potřeba tak vyšroubovat napínák osy "X".
Pak stačí nejprve zacvaknout horní část pod kolečko a spodní část sklopit pod spodní kolečko (možná bude potřeba trochu víc síly). Poté už pouze zašroubujte zpět kolečko napínáku, pokud nebyla v minulosti provedena jeho úprava nebo náhrada tak držák nebude překážet.

If you notice any imperfection, problem or defect. Feel free to contact me, I will try to arrange a remedy :)

My printed model has these settings:

Nozzle -             0,4 mm

Quality -            0.20 mm

Infill -                25% (Slice)

Perimeters -     3

Supports -        nope

Print time: cca 4 hours

 

Tags