Voron Exhaust Cover - 46 Configurations
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a Voron exhaust cover with PG-7 threads, then got carried away and made every configuration I could think of.
- Rating
- 0 / 5
- Likes
- 23
- Downloads
- 103
- Makes
- 0
- Views
- 537
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
Do you need a super specific set of threaded passthroughs on your Voron exhaust cover? Did you use 3mm foam seal on your back panel, instead of the BOM 1mm? I got you covered.
When browsing the files, select the folder for the thickness of foam seal you used on your back panel. The filenames have the passthrough type(s) in the name, and if it's a single or double passthrough part. The available passthrough types are:
- PTFE tube (smooth 4.2mm diameter hole)
- PC4-M6
- PC4-M10 (this is what is on the stock Voron filter housing)
- PG-7
- PG-9
- PG-11
- M12x1.5
- M16x1.5
I tried to make every reasonable combination, but if the one you want is missing, shoot me a message and I'll see what I can do. If you want to remix it yourself, there are STEP files of the blanks for both single and double passthrough models in 1mm and 3mm back panel foam seal thicknesses.
2x M5x10 bolts and matching roll-in nuts will secure this to the rear horizontal extrusion. 1mm foam seal should be installed on the flange of the exhaust cover for best fit. There is ~0.5mm designed in for seal compression.
Thanks for looking, and let me know if you have any questions, comments, or suggestions for improvement.