Simagic P2000 Controller 4040 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Requires 2x M6 socket head cap screws to fasten to the 4040 extrusion. Does not require any additional hardware to secure the P2000 controller, it simply snaps into place as shown in the gif.
Orient the part on the build plate so it stands vertically for maximum strength. No supports are required. Also ensure no seams are present in the compliant part of the design.
NOTE: I'd recommend printing this in a filament that isn't too rigid. It requires compliance to function correctly. The part printed in the photos/videos was printed in ABS, however PETG or Nylon may also be suitable. PLA may break, please comment if you have success with a particular filament.